EECS260 Optimization (Fall semester 2019)

Instructor

Miguel Á. Carreira-Perpiñán Professor Electrical Engineering and Computer Science School of Engineering University of California, Merced mcarreira-perpinan-[at]-ucmerced.edu; 209-2284545 Office: 217, Science & Engineering Building 2

Office hours: by appointment (SE2-217).

Lectures: Mondays/Wednesdays 4:30-5:45pm (COB264).

Lab class: Thursdays 1:30-4:20pm (COB270).

Course web page: http://faculty.ucmerced.edu/mcarreira-perpinan/teaching/EECS260

Course description

Optimization problems arise in multiple areas of science, engineering and business. This course introduces theory and numerical methods for continuous multivariate optimization (constrained and unconstrained), including: line-search and trust-region strategies; conjugate-gradient, Newton, quasi-Newton and large-scale methods; linear programming; quadratic programming; penalty and augmented Lagrangian methods; sequential quadratic programming; and interior-point methods. The primary programming tool for this course is Matlab.

Prerequisites: MATH 23, MATH 24, MATH 141 or equivalent (undergraduate courses in linear algebra and multivariate calculus), MATH 131 (numerical analysis I). Basic concepts will be briefly reviewed during the course.

Textbook

Required textbook (get the errata for the 1st and the 2nd edition, and the additional errata):

Jorge Nocedal and Stephen J. Wright: Numerical Optimization, second ed. Springer-Verlag, 2006. This book is accessible online from within UC Merced.

Other recommended books:

R. Fletcher: Practical Methods of Optimization. Wiley, 1987.
David G. Luenberger and Yinyu Ye: Linear and Nonlinear Programming, 3rd ed. Springer, 2008. Available online from within UC Merced.
Stephen Boyd and Lieven Vandenberghe: Convex Optimization. Cambridge University Press, 2004. Available online.

If you want to refresh your knowledge of linear algebra and multivariate calculus, the following are helpful (any edition or similar book is fine):

Seymour Lipschutz: Schaum's Outline of Linear Algebra. McGraw-Hill.
Murray Spiegel: Schaum's Outline of Vector Analysis. McGraw-Hill.
Frank Ayres: Schaum's Outline of Matrices. McGraw-Hill.
Richard Bronson: Schaum's Outline of Matrix Operations. McGraw-Hill.
Erwin Kreyszig: Advanced Engineering Mathematics. Wiley.
Gilbert Strang: Introduction to Linear Algebra. Wellesley-Cambridge Press.
Gilbert Strang: Linear Algebra and Its Applications. Brooks Cole.

Syllabus and required textbook reading

Syllabus

Before each class, you should have read the corresponding part of the textbook and the notes. I will teach the material in the order below (which is more or less the order in the book).

Introduction (ch. 1: all) and math review (appendix A: skim it)
Unconstrained optimization:
- Fundamentals of unconstrained optimization (ch. 2: all)
- Line search methods (ch. 3: pp. 30-49; skip proofs in sec. 3.3)
- Trust-region methods (ch. 4: pp. 66-71)
- Conjugate gradient methods (ch. 5: all, but skim pp. 113-114, 119-120, 125-133)
- Quasi-Newton methods (ch. 6: pp. 135-146; skip 147-152; skim rest)
- Large-scale unconstrained optimization (ch. 7: pp. 164-170, 176-181, 185-190; skip 171-175, 182-184)
- Calculating derivatives (ch. 8: pp. 193-206; skim 199-201, 203; skip rest)
- Derivative-free optimization (ch. 9: all except pp. 226-229, 237)
- Least-squares problems (ch. 10: all but skim pp. 251-252, 259-268)
- Nonlinear equations (ch. 11: all but skim 277-279, 287-295; skip 283-284)
Constrained optimization:
- Theory of constrained optimization (ch. 12: all except as follows: from section 12.2 see defs. 12.3, 12.4 and skip the rest; from section 12.5 skip the proofs of second-order conditions; skip sections 12.4, 12.6, 12.7)
- Linear programming: the simplex method (ch. 13: all except as follows: skip sections 13.4 to 13.7)
- Linear programming: interior-point methods (ch. 14: all except as follows: skip lemmas 14.1, 14.2 and the proof of th. 14.3; skim pp. 410, 412-413; skip section 14.3)
- Fundamentals of algorithms for nonlinear constrained optimization (ch. 15: pp. 421-437)
- Quadratic programming (ch. 16: all except as follows: skip sections 16.2-3, skim section 16.5 and skim pp. 482-485)
- Penalty and augmented Lagrangian methods (ch. 17: all except as follows: skip def. 17.1, skim section 17.4)
- Sequential quadratic programming (ch. 18: sections 18.1-2; skip rest)
- Interior-point methods for nonlinear programming (ch. 19: sections 19.1, 19.2 and 19.6; skip rest)

Handouts and assignments

Some Matlab code to plot contours of functions, steepest descent, backtracking line search, convergence order estimation, numerical gradient and Hessian, etc.
Some practical advice regarding Matlab.
The notes to accompany the textbook (bring the corresponding part to each class):
Carreira-Perpiñán, M. Á. (2018): EECS260 Optimization: Lecture notes. University of California, Merced, 2005-2018.
Homework (to do on your own, not graded):
- Homework #1 (covering chapters 1-4 and A from the book)
- Homework #2 (covering chapters 5-11 from the book)
- Homework #3 (covering chapters 12-15 from the book)
- Homework #4 (covering chapters 16-19 from the book)
Projects (to be submitted and graded):
- Project #1 (implementing unconstrained optimization methods) due Oct. 27, in groups of 2 students
- Project #2 (implementing a constrained optimization method) due Dec. 10, in groups of 2 students
- Project #3 (presenting and discussing several papers in class), individual (no groups)
For projects done in groups, briefly describe in the report what each member of the group did. Note that each member should understand the whole project. Project 2 will build on your project 1 solution.

Course grading

The course grading will be based on three projects and a final exam, as follows (but note that too low a grade in the exams cannot be compensated by a high grade in the projects or vice versa):

Project 1 (15%): implementing a method for unconstrained optimization problems
Project 2 (25%): implementing a method for constrained optimization problems
Project 3 (10%): discussing research papers related to optimization
Midterm exam (25%): in-class, closed-book, consisting of problems and conceptual questions
Final exam (25%): as the midterm

While I encourage you to discuss your work with other students, the projects and the exam must be the result of your own work without collaboration.

I will also give homework exercises (mainly from the textbook) of two types, pencil-and-paper and Matlab programming. I will not ask you to solve them, i.e., they will not count towards your grade. I will give the solutions and solve some of the exercises in class. However, I strongly recommend that you try to solve all the exercises on your own.

Grade curves: midterm, final.

Optimization links

The Best of the 20th Century: Editors Name Top 10 Algorithms, SIAM News, May 16, 2000. A look at ten algorithms named some of the "best" of the computer age.
Who invented the great numerical algorithms?
Newton's method and Newton fractal.
Demos:
Matlab Optimization Toolbox. You may find useful to compare the textbook and the user's guide. You can see some demos by running Matlab and typing demo toolbox optimization in the command window. But note that you will be writing your own code, rather than using the Toolbox.
NEOS Guide: information about most areas of optimization.
Optimization Online: a repository of eprints about optimization.
Mathematical Programming Glossary.
A quadratic programming page, including software, test sets and a bibliography.
CUTEst: a Constrained and Unconstrained Testing Environment on steroids: a constrained and unconstrained testing environment for numerical optimization.
Matrix identities (handy formulas for matrix derivatives, inverses, etc.):
- Matrix calculus from Mike Brookes' Matrix Reference Manual
- Matrix cookbook

Matlab tutorials

If you have never used Matlab, there are many online tutorials, for example:

As well as books:

D. J. Higham and N. J. Higham: MATLAB Guide, 3rd ed. SIAM, 2017. Companion site for the book. Available online from within UC Merced.
C. B. Moler: Numerical Computing with MATLAB, revised ed. SIAM, 2008. Available online from within UC Merced.

Also see Matlab courses from Engineering Service Learning at UC Merced.